Model 570 Information
- Open “No Tools” Design
- Screw removal with material in hopper
- USDA / Dairy 3-A version available
A Loss in Weight Feeder is a device or collection of devices, which receives material from an upstream supply and meters that material into a downstream process at a set feedrate based on feedback from a weigh sensing device.
Materials of Construction
- 304 Stainless Steel Metal Parts, 316 SS is optional
- All Non-Metallic Parts are USDA or FDA Approved
Power Requirements
- 115 V ± 10% Single Phase, 50/60 Hz
Variable Speed Drive
- 1/4 or 1/2 HP DC Motor with Variable Frequency Drive
Accuracy
- Up to ± 0.25% of Set Rate at 2 Sigma
Ambient Temperature Limits
- 0° to 77°C (32° to 170° F)
Turndown
- 15:1 from Maximum Feedrate
Optional Accessories
- Manual Refill Hopper Cover
- Hazardous Location Electrical Components
- Chemical Duty or BISSC Certified Motors and Reducers
- Special Materials of Construction
- Hung-from-Above and Wall Structures Available
- Extended Discharge and Spout Lengths
- Spout Available with Vertical Discharge and End-Bearing Auger Support
- For Spare parts for this model and more click here
Need help? Contact our Merrick Support team
| Model | Base Hopper Size | Maximum Feedrate | Height | Length | Width |
| 570-E1 | 0.75 Ft³ | 2,000 P/H 907 Kg/H |
33.00 Inches 838 mm |
25.0 Inches 635 mm |
25.0 Inches 635 mm |
| 570-E2 | 1.50 Ft³ | 10,000 P/H 4,536 Kg/H |
38 Inches 965 mm |
25.0 Inches 635 mm |
25.0 Inches 635 mm |
| 570-E3 | 5.00 Ft³ | 24,000 P/H 10,886 Kg/H |
50.0 Inches 1,270 mm |
37.00 Inches 940mm |
36.0 Inches 914 mm |
